Step-by-Step Instructions for Removing and Reassembling Push Pins on Polemistis Watches
Part 1: Removing the Push Pin
-
Prepare Your Tools
Gather the necessary tools: a spring bar tool, a pin punch set, tweezers, and a stable work surface to prevent scratches. -
Detach the Bracelet
Use the spring bar tool to carefully remove the bracelet from the watch case. If your watch has lug holes, compress the spring bar using the cylindrical end of the tool to release the end link. If there are no lug holes, use the forked end on the back of the lugs to push in the collars of the spring bars. -
Position the Bracelet
Place the bracelet in a holding block from your pin punch set, ensuring the arrows (if present) on the links point downwards. This indicates the direction in which the pins will be pushed out. -
Punch Out the Pin
Select the appropriate punch size that fits snugly into the pin hole. Center the punch on the pin and apply careful taps with a hammer. Once the pin begins to protrude from the opposite side, use your fingers or tweezers to gently pull it out, avoiding pliers to prevent bending.
Part 2: Reassembling the Bracelet
-
Align the Links
After achieving the desired bracelet size, align the links of the bracelet back together in the correct configuration. Ensure that they fit snugly and that any directional arrows are oriented correctly. -
Insert the Pin
Take the pin you removed earlier and insert it back into the hole of the link, making sure it goes through both connecting links. If you're using split pins, ensure the split end is positioned correctly. -
Secure the Pin
Using the pin punch, carefully tap the pin back into place until it is fully seated within the links. Keep the punch centered and apply gentle taps to avoid damaging the bracelet or leaving marks. -
Reattach the Bracelet to the Watch
Finally, reattach the bracelet to the watch case using the spring bar tool. Compress the spring bars and insert them back into the lugs of the watch, ensuring that the bracelet is securely attached before wearing your timepiece.
By following these step-by-step instructions, you can effectively remove and reassemble the push pins on your Polemistis watch, ensuring a secure fit and maintaining the integrity of your timepiece.
Step-by-Step Instructions for Removing and Reassembling Screw Pins on Polemistis Watches
Part 1: Removing the Screw Pin
-
Prepare Your Tools
Gather the necessary tools: a screwdriver suitable for the screws in your watch bracelet, tweezers, and a stable work surface to avoid scratching your watch. -
Detach the Bracelet
Use the screwdriver to carefully unscrew the screw pins that connect the links of the bracelet. Turn the screws counterclockwise until they are loose enough to be removed completely. If your watch has lug holes, you may need to detach the bracelet from the watch case before proceeding. -
Remove the Screw Pins
Once the screws are loosened, use tweezers to gently pull them out from the links. Be careful to keep track of the screws, as they are small and can be easily misplaced. -
Separate the Links
After removing the necessary screw pins, carefully separate the links to achieve the desired bracelet size. Make sure to note the configuration of the links for reassembly.
Part 2: Reassembling the Bracelet
-
Align the Links
After achieving the desired bracelet size, align the links back together in the correct configuration. Ensure they fit snugly and that any decorative elements are oriented properly. -
Insert the Screw Pins
Take the screw pins you removed earlier and insert them into the holes of the links where they were removed. Ensure that the screws are aligned correctly with the threading in the links. -
Secure the Screw Pins
Using the screwdriver, turn the screws clockwise to tighten them securely in place. Be careful not to overtighten, as this could damage the links or strip the screws. -
Reattach the Bracelet to the Watch
Finally, if you previously detached the bracelet, reattach it to the watch case. Ensure that the bracelet is securely connected before wearing your Polemistis watch.
By following these step-by-step instructions, you can efficiently remove and reassemble the screw pins on your Polemistis watch, ensuring a secure fit and maintaining the quality of your timepiece.
